Instar Servo Driver adopts DSP+FPGA architecture to speed up data acquisition and processing speed, which has high integration, good reliability. And rich digit and analog interface, position feedback pulse frequency division and zero pulse expansion output can connect with a variety of upper control devices. 

Instar Servo Motor offer industry-leading torque/inertia ratios, and uses magnetic steel surface mount technology to meet demanding industrial applications with high dynamics.

Instar Servo Motor cuts off the power in case of power failure or emergency. Its output shaft and body are connected with magnetic pair to provide stable braking torque on the output shaft. The tension can be preset and precisely controlled, besides it is also stable and reliable with simple structure and long life, and motor with brake is very convenient to be installed and adjusted.

The Instar Closed-loop Stepper Driver features low vibration at low speeds, high torque at high speeds, and fast response for better continuous operation.

Instar RS485 bus Closed-loop Stepper Driver integrates the intelligent motion controller function, which can control the closed-loop motor d driver through Modbus' command. It has low vibration at low speed driving, high torque at high speed driving, and fast response to make it continuously operated.

Instar EtherCAT bus closed loop driver can completely replace the traditional pulse direction control closed loop driver in function. Supports Profile position, Profile velocity, Cylic synchonous position, Cyclic synchonous velocity, and Home.

Instar Closed-loop Stepper Motor is designed with cold-rolled silicon steel sheet and high-temperature resistant permanent magnet material. It is equipped with 1000r/p photoelectric encoder and its maximum number of revolutions is 3000rpm. It has long-term reliability, high positioning accuracy and compact size.

Instar Closed-loop Stepper Motor with brakes cuts off the power in the event of a power outage or emergency. The output shaft and the body are connected by a magnetic pair to provide a stable braking torque on the output shaft. The tension can be preset and precisely controlled, the tension is stable and reliable, the structure is simple, the service life is long, and the installation and adjustment are convenient.

Instar offers closed loop hollow shaft stepper motors in sizes NEMA11 to NEMA23, hollow shaft stepper motors for laying cables or passing laser beams, mounting suction cups to save space.

Instar linear closed-loop stepper motors are ideal for applications that require small positioning motions with high thrust and pull forces in confined spaces. Instar provides externally driven linear closed-loop stepper motors and through-shaft linear closed-loop stepper motors in different sizes, to cover a wide range of automation fields.

Instar gearboxes are closed-loop stepper motors with high efficiency and compact size especially suitable for automation applications.

 Instar Stepper Driver adopts bipolar constant current chopper method to reduce the noise of the stepper motor and make the operation more stable. The increase of the driver power supply voltage greatly improves the stepper driver capability and high-speed performance of the stepper motor. When the stepper pulse stops for more than 100ms. The coil current is automatically halved to reduce the heat generated by the driver by 50%.  

Instar RS485 bus Stepper Driver integrates the intelligent motion controller function, which can control the motor d driver through Modbus' command. It has low vibration at low speed driving, high torque at high speed driving, and fast response to make it continuously operated.

Instar EtherCAT bus driver can completely replace the traditional pulse direction control driver in function. Supports Profile position, Profile velocity, Cylic synchonous position, Cyclic synchonous velocity, and Home.

Instar Stepper Motor are available in nine sizes from 28mm to 130mm with high step angle accuracy and high step resolution for a wide range of automation applications.

Instar Stepper Motor with brake cuts off the power in the event of a power outage or emergency. The output shaft and the body are connected by a magnetic pair to provide a stable braking torque on the output shaft. The tension can be preset and precisely controlled, the tension is stable and reliable, the structure is simple, the service life is long, and the installation and adjustment are convenient.

Instar offers NEMA11 and NEMA34 hollow Stepper Motor, which are used to lay cables or pass through laser beams and install suction cups to save space.

Instar linear Stepper Motor are ideal for small positioning motion applications with high thrust and tension in confined spaces. Besides, they have different sizes to cover a wide range of automation applications.

Instar Gearbox Stepper Motor are designed for high efficiency and compact size, making them ideal for automation applications.