中文
繁體
| Features |
● Adoption of DSP chips, greatly accelerate the speed of data acquisition and processing.
● Application of large-scale arry circuit improves the reliability.
● Adoption of IPM power device decreases the volume of the driver.
● Monitor function surpports displaying 24 parameters of their state.
● Two input control modes: pulse position and simulation speed.
● Consise appearance and compact structure.
| Performance |
● High speed ratio, constant torque: speed ratio is 1：5000.
● High speed, high precision: max rotate speed up to 3000rpm. Positioning accuracy: 1/10000 rev.
● Out power:0.2~2.2Kw.
| Application |
● CNC machine tools: engraving and milling machine, engraving machine, spring machine, spark machine, wire cutting, flying shear equipment etc.
● Electronic equipment: winding machine, wire stripping machine, lithium battery production equipment, dispensing machine, ceramic equipment etc.
● Packaging equipment: glue filling machine, fixed length cutting machine, tissue machine, diaper equipment etc.
● Textile equipment: flat knitting machine, sock machine, round edge machine, embroidery machine, spinning machine, knitting machine etc.
● Printing equipment: screen printing machine, overprinting machine, pad printing machine etc.
● Laser equipment: engraving machine, cutting machine, marking machine etc.
| Technical Parameter |
Servo driver model | SDA06-MF20-□□□ | SDA10-MG20-□□□ | |
Input Power | Single/Three phase | ||
AC220V（-15%～+10%）50～60Hz | |||
Controlling principle | Attains the PWM control by adoptiion of AC sine-wave control and optimal PID control | ||
Feedback Signal | Incremental encoder 2500ppr with U/V/W signal control | ||
Position output signal | Available to set the electronic gear output of pulse rate, and Z-Phase open-collector output. | ||
Protection Function | Over-current, short circuit, overload, over / lack voltage of main circuit, abnormal braking, abnormal encoder, overspeed, position error etc. | ||
Control Mode | Position control, speed control, trial run and JOG run. | ||
Regenerative braking resistor | Built-in（60W，40Ω） | ||
Characters | Speed frequency response | 200HZ or more | |
Speed fluctuation | <0.03（load fluctuation 0～100%）；<±0.02 ( power fluctuation -15～+10%）（the data matches the rated speed） | ||
Speed ratio | 1：5000 | ||
Pulse frequency | ≤500kHz | ||
Input Control | ① servo on ② alarm reset ③ clock wise rotation driver prohibted ④ counterclockwise driver prohibited ⑤ error counter clear / internal speed selection 1 ⑥ pulse command prevented/ internal speed selection 2 ⑦ multifunctional input port 1 ⑧ multifunctional input port 2 | ||
Output Control | servo ready, servo alarm, positioning finished / speed reached | ||
Position Control | Input mode | Pulse command + symbol, clockwise pulse / counterclockwise pulse, 2 phase orthogonal instruction pulse | |
Electronic gear | 1～32767/1～32767 | ||
Feedbak pulse | 10000p/r | ||
Speed Control | external command / 4 internal speed control | ||
Acceleration / deceleration control | Parameter setting1~10000ms/1000r/min | ||
Monitoring function | Speed, current position, position command, position deviation, motor torque, motor current, linear speed, position control, pulse frequency under position command, running state | ||
Operation | LED digital tube, keystroke | ||
Weight | 2kg | ||
Service Ambient | Temperature | Working enviroment：0～50℃ storage environment：-20℃～65℃ | |
Humidity | <90%（No Condensation） | ||
Altitude | ≤1000 meters | ||
Vibration | Less 0.5G（4.9m/S2），10~60Hz（not continious running） | ||
※ Please discuss with us or our agents if there is any other special requirements.
| Dimension |
